Vaporesso GT Core Coil Heads x 3
product unavailable
Description
The Vaporesso GT Core Replacement Coils for the NRG Sub-Ohm Tank are a wonderful addition to any vapers collection that has picked up the Revenger Kit or the NRG tank providing two high-powered coil heads that perform optimally at the lower end of the wattage spectrum as well as the higher end, covering a vast range of vaping styles and preferences to promote a truly unforgettable vaping experience from first vape ‘till last
What equipment can Vaporesso GT Cores Coils be used with?
The GT Cores replacement coils from Vaporesso are compatible:
- NRG Clearomizer,
- NRG SE Clearomizer,
- NRG PE Clearomizer,
- NRG-S Clearomizer,
- Cascade Baby SE Clearomizer,
- Cascade One Clearomizer,
- Cascade Mini Clearomizer,
- TFV8 Baby Clearomizer,
- TFV8 Big Baby Clearomizer,
- TFV9 Clearomizer ,
- Guardian Clearomizer,
- Skrr-S Clearomizer, Skrr-S Mini Clearomizer,
- Revenger Mini Set, Sky Solo Set,
- Sky Solo Plus 2ml Set,
- Sky Solo Plus 8ml Set,
- Luxe 2 Set,
- Gen S & NRG-S Set,
- Swag 2 Set,
- Luxe Nano Set
- AIO Priest Set.
The following models of GT Cores evaporator heads from Vaporesso are available:
- - GT CCELL atomizer head with 0.5 ohm (single coil - ceramic and Japanese organic cotton - SS316) : airy DL draw resistance - use between 25 and 35W - mixing ratio 50PG/50VG to 20PG/80VG
- - GT CCELL2 atomizer head with 0.3 ohm (single coil - ceramic and Japanese organic cotton - SS316) : airy DL draw resistance - between 35 and 40W - mixing ratio 50PG/50VG to 20PG/80VG
- - GT Meshed evaporator head with 0.18 ohm (mesh): very airy DL draw resistance (large vapor clouds) - between 50 and 85W - mixing ratio 40PG/60VG to 20PG/80VG
- - GT2 evaporator head with 0.4 ohms (single coil - Kanthal and Japanese organic cotton): airy DL draw resistance - between 40 and 80W - mixing ratio 50PG/50VG to 20PG/80VG
- - GT4 evaporator head with 0.15 ohm (dual coil - Kanthal and Japanese organic cotton): very airy DL draw resistance (large vapor clouds) - between 30 and 70W - mixing ratio 40PG/60VG to 20PG/80VG
- - GT4 meshed evaporator head with 0.15 ohm (mesh): very airy DL draw resistance (large vapor clouds) - between 50 and 75W - mixing ratio 40PG/60VG to 20PG/80VG
- - GT6 evaporator head with 0.2 Ohm (triple coil): very airy DL draw resistance (large vapor clouds) - between 40 and 100W - mixing ratio 40PG/60VG to 20PG/80VG
- - GT8 evaporator head with 0.15 Ohm (Quad Coil - Kanthal and Japanese organic cotton): very airy DL draw resistance (large vapor clouds) - between 50 and 110W - Mixing ratio 40PG/60VG to 20PG/80VG
How are Vaporesso GT Cores coils replaced?
To change the coil, unscrew the clearomizer and then screw or pull out the atomizer head. Light a new coil and place it in the slot. After filling, wait 10 minutes before starting to vape.
Please note that you will need to replace your coil approximately every 2 weeks depending on usage. Remember to replace your coil if you notice a change in flavor or a burnt taste.