Categories
Price
-
from
to
VOOPOO Replacement Pods – PnP, PnP X, Argus & Vinci (EU 2ml)
VOOPOO replacement pods in this category are 2ml pod units designed for compatible VOOPOO pod systems available in Ireland, including PnP, PnP X, Argus, Vinci and ITO-based platforms.
All EU retail variants comply with Tobacco Products Directive (TPD) implementation in Ireland, maintaining a maximum 2ml liquid capacity per pod. Depending on platform design, pods may support replaceable PnP coils or integrated mesh coil structures.
VOOPOO Pod
Technical Architecture – VOOPOO Pod Ecosystem
VOOPOO replacement pods are platform-specific liquid chambers engineered for defined device families. Pod geometry, coil interface, airflow routing and docking/contact layout vary between PnP, PnP X, Argus, Vinci and ITO ecosystems.
Compatibility notice: Pods and coils are not universally cross-compatible unless explicitly stated within the same platform family. Always verify by exact device model name and the pod/coil family printed on the EU retail pack supplied for Ireland.
Core Platform Types
- PnP Pods: pods designed around replaceable PnP coil heads. Used across multiple VOOPOO device families (model dependent); verify the exact pod generation supplied for your device.
- PnP X Pods: updated architecture aligned to the PnP X coil family used on newer platforms (for example Drag X2 / Drag S2). PnP X coils are not cross-compatible with earlier PnP coils by default.
- Argus Integrated Pods: platform-specific integrated-coil pods used on selected compact Argus devices (model dependent). Pod fitment is device-specific.
- ITO / Doric Pods: platform-specific pods designed around the ITO coil system. Verified examples include ITO Pod (Doric 20) and ITO X Pod (Drag Q), depending on device generation.
Resistance & Usage Range
VOOPOO pod platforms support a wide resistance spectrum depending on coil family and device airflow design. The mapping below is a general orientation and does not replace coil-specific rated specifications printed on packaging:
- Lower resistances (example: ~0.3Ω–0.6Ω, coil dependent): commonly used with looser airflow and higher output envelopes on supported devices.
- Mid resistances (example: ~0.7Ω–0.8Ω, coil dependent): often used for loose MTL ↔ restricted profiles depending on airflow path and device output logic.
- Higher resistances (example: ~1.0Ω–1.2Ω, coil dependent): commonly structured for tighter MTL operation and frequently aligned with balanced VG/PG viscosity.
Liquid viscosity and sweetener load influence saturation stability, service interval and replacement frequency. Always treat the coil’s printed operating window as the primary boundary condition.
Docking, Seals & Refill Construction
VOOPOO pods use platform-dependent docking formats (commonly magnetic seating or click-fit retention) to maintain stable contact alignment. Refill access is typically provided via sealed silicone ports (side-fill or bottom-fill depending on the pod), and leak behaviour is primarily influenced by seal condition, fill-port closure and correct pod seating.
Pod System Technical Matrix
| Platform | Coil Type | Capacity (Ireland/EU Retail) | Resistance Support | Airflow Profile | Compatibility Notes |
|---|---|---|---|---|---|
| PnP Pods | Replaceable PnP coil heads | ≤2ml (TPD-aligned EU retail) | Coil dependent (spans MTL ↔ looser profiles) | Device dependent | PnP ecosystem only; verify the exact pod generation supplied for your device. |
| PnP X Pods | PnP X coil family | ≤2ml (TPD-aligned EU retail) | Coil dependent (PnP X range) | Device dependent | PnP X is not interchangeable with standard PnP by default. Verify coil family on packaging. |
| Argus Integrated | Integrated coil pod (model dependent) | ≤2ml (TPD-aligned EU retail) | Pod dependent | Typically MTL / restricted (model dependent) | Argus integrated pod families are device-specific; verify by exact model name. |
| ITO / Doric | ITO coil system | ≤2ml (TPD-aligned EU retail) | Coil dependent (for example 0.5Ω / 1.0Ω / 1.2Ω variants are commonly listed) | MTL / restricted (device dependent) | Designed for ITO Pod / ITO X Pod ecosystems depending on device generation; verify pod + coil pairing on packaging. |
Price & Replacement Planning – Ireland 2026
Pods with replaceable coil heads (PnP / PnP X ecosystems) support coil-only replacement, while integrated pod systems require full pod replacement once coil performance declines. Liquid sweetness level, airflow setting and puff duration can materially change replacement intervals.
Service Interval (Practical Indicators)
Coil lifespan should not be treated as a fixed “ml throughput” specification. Use practical indicators instead: persistent flavour loss, recurring gurgling after correct reseating, visible darkening, or repeated dry-hit events under the rated operating window. Batch variance and user behaviour can materially change outcomes.
Regulatory Notice – Ireland
EU retail pod/tank variants supplied in Ireland are aligned with TPD implementation: compliant cartridge/tank capacity does not exceed 2ml. Verify capacity on the EU pack for your specific pod SKU.
FAQ
Are PnP and PnP X pods compatible with each other?
No, not by default. PnP X uses a different coil family and interface and should not be interchanged with standard PnP unless the manufacturer explicitly states cross-compatibility for a specific model.
Are VOOPOO pods compliant with Irish TPD rules?
EU retail variants supplied in Ireland maintain a maximum 2ml liquid capacity in accordance with TPD implementation.
Which resistance is suitable for tighter MTL use?
Higher-resistance variants (coil and device dependent) are commonly structured for tighter MTL airflow profiles. Always follow the coil’s rated operating window printed on packaging.
Adult Use Notice – Ireland
Products in this category are intended for adults aged 18+ in Ireland.
Last updated: 18 February 2026