Vaporesso Armour S Vape Kit

Vaporesso Armour S Kit – 5–100W DTL Mod | 21700 / 18650 | iTank 2 (Ireland/EU TPD)

The Vaporesso Armour S Kit is a regulated Direct-To-Lung (DTL) device designed for a single external battery (21700 or 18650 with adapter). It provides adjustable output from 5W to 100W and is supplied with the Vaporesso iTank 2 in an Ireland/EU retail configuration.

Battery is NOT included in the kit.

Construction & TPU Protection (Armour Design)

Armour S uses a zinc-alloy chassis with a TPU (thermoplastic polyurethane) outer wrap. This shell is designed to add surface protection and grip compared to a bare painted metal housing. Protection performance depends on impact angle and real-world handling conditions.

Uni-Lock System

The device uses Vaporesso’s Uni-Lock mechanism: a single slider acts as the firing control and as a lock to reduce accidental activation.

• Slide to enable firing
• Slide to lock the device
• Designed to reduce pocket/bag activation risk

Quick Technical Specifications

• Battery Support: 1 × 21700 or 1 × 18650 (adapter/sleeve)
• Output Range: 5–100W
• Chipset: AXON
• Display: 0.96" screen
• Charging: USB-C (device-side charging supported; external charger recommended for best battery care)
• Tank: iTank 2 (Ireland/EU retail capacity variant)
• Coil Platform: GTi Mesh (COREX-labelled coil structure)
• Vaping Style: DTL (airflow and coil dependent)

Dimensions & Weight (Manufacturer Stated)

• Dimensions: 154.8 × 41.9 × 36 mm
• Weight: approx. 257 g (manufacturer stated)

Note: practical weight and handling vary with installed battery type and the specific Ireland/EU retail tank configuration supplied.

COREX Heating Structure – GTi Coils

GTi mesh coils are marketed with Vaporesso’s COREX-labelled heating structure. In practical terms, coil behaviour is governed by the printed resistance, the rated wattage window, airflow setting, and liquid viscosity.

iTank 2 – Airflow & Fill Architecture (Tank Dependent)

iTank 2 uses adjustable airflow control and top-fill access (tank configuration dependent). Always close the fill port fully and keep seals clean to reduce seepage risk.

What’s in the Box (Typical Kit Contents)

• 1 × Vaporesso Armour S Mod (battery not included)
• 1 × Vaporesso iTank 2 (Ireland/EU retail variant)
• 1 × GTi Mesh Coil 0.2Ω (commonly supplied pre-installed)
• 1 × GTi Mesh Coil 0.4Ω (commonly supplied as spare)
• 1 × 18650 Adapter/Sleeve
• 1 × USB-C Cable
• 1 × Spare parts pack (seals / glass / accessories; pack contents can vary by batch)
• 1 × User Manual / documentation

Batch variance note: kit contents can vary slightly by market/batch. Verify included items on the retail packaging supplied in Ireland before activation.

Coil Compatibility & E-Liquid Guidance (Wattage Window First)

GTi 0.2Ω Mesh:

• Rated range (commonly listed): 60–75W
• Viscosity alignment: commonly paired with higher-VG blends (example ~70VG) for stable saturation

GTi 0.4Ω Mesh:

• Rated range (commonly listed): 50–60W
• Viscosity alignment: commonly paired with higher-VG blends (example ~70VG)

Cold Climate Advisory (Ireland): higher-VG liquids thicken at lower temperatures. Allow extended priming/saturation time before first activation and avoid exceeding the coil’s printed wattage range.

Hardware Specification Matrix

FAQ

Document Update Notice:
Last technical verification and update: 18 February 2026.