Uwell Caliburn G3 Pro Pod Vape Kit
Regular price:
product unavailable
Description
Advanced Pod System with Adjustable Output and Dual Activation
The Uwell Caliburn G3 Pro is a refillable pod system designed for controlled MTL and restricted DL use. It features a 1000mAh internal battery, adjustable output up to 35W, and operates using integrated G3 pod cartridges.
The EU configuration complies with TPD requirements, including a 2ml refillable pod system and USB-C fast charging. The device supports both auto-draw and button activation modes, with a full-screen interface for real-time monitoring. Devices of this type are commonly available through specialist vape shop environments where compatibility and resistance matching are clearly defined.
Key Technical Parameters
- Battery: 1000mAh internal
- Output Range: 5W–35W adjustable
- Activation: Auto-draw and button
- Pod Capacity: 2ml (TPD compliant)
- Charging: USB-C (5V/2A)
- Included Pods: 0.4Ω (RDL) and 0.9Ω (MTL)
What’s Included
- 1 × Uwell Caliburn G3 Pro Device
- 1 × 0.4Ω Integrated Pod (2ml EU)
- 1 × 0.9Ω Integrated Pod (2ml EU)
- 1 × USB-C Charging Cable
- 1 × User Manual
Box contents may vary depending on production batch.
Operation & Control System
- Auto-draw activation supported
- Fire button activation supported
- Adjustable wattage up to 35W
- Multiple trigger modes: auto / button / dual
- Full colour display (battery, wattage, resistance)
- Adjustable airflow slider
Pod Filling Protocol – Side-Fill System
- Remove pod from the device
- Open the side silicone stopper
- Insert nozzle into fill port only
- Avoid central airflow chimney
- Close stopper securely
- Allow sufficient saturation before use
E-Liquid Compatibility & Resistance Mapping
0.4Ω Pod (Restricted DL):
- ✔ Optimal: 60–70VG
- ✔ Acceptable: 50/50 VG/PG
- ⚠ Higher PG liquids may increase temperature at higher wattage
0.9Ω Pod (MTL):
- ✔ Recommended: 50/50 VG/PG (nicotine salts or freebase)
- ⚠ High VG not recommended in low temperature conditions
Viscosity Note (Ireland): In colder conditions, VG-based liquids become thicker. If dry hits occur, reduce power slightly and extend saturation time. This behaviour is commonly observed across pod systems used in Ireland and discussed within experienced vape shop technical guidance.
Hardware Specification Matrix
| Component | Specification | User Action | Notes |
|---|---|---|---|
| Battery | 1000mAh internal | Charge via USB-C | WEEE disposal applies |
| Output | 5W–35W adjustable | Adjust based on resistance | Regulated output |
| Pod System | G3 integrated pods | Replace entire pod | Not compatible with G/G2 |
| Filling | Side-fill | Remove pod to refill | Leak-resistant |
| Display | Colour screen | Monitor settings | User-controlled |
Compatibility
Compatible exclusively with Uwell Caliburn G3 integrated pods. Not compatible with Caliburn G or G2 platforms.
Safety Features
- Short-circuit protection
- Low voltage protection
- Overheat protection
- 8-second cut-off
- Open circuit detection
Regulatory & Usage Notice (Ireland)
This product is intended for adult users (18+) in Ireland. It complies with EU TPD regulations, including a maximum 2ml pod capacity. Always use compatible e-liquids and operate within recommended power ranges. Availability may vary depending on the vape shop and distribution batch.
FAQ
Can I use Caliburn G or G2 coils with the G3 Pro?
No. The G3 Pro uses integrated G3 pods and is not compatible with G or G2 systems.
Can I disable the fire button?
Yes. You can select between auto-draw only, button only, or dual activation modes.
How long should I wait after filling?
Allow several minutes for full wick saturation before first use.
What e-liquid works best with this device?
Use 60–70VG for 0.4Ω pods and 50/50 VG/PG for 0.9Ω pods for optimal performance.
Document Update Notice:
Last reviewed and updated: February 2026.
Safety
Related products
UWELL Caliburn G3 Replaceable Pods (4-Pack)
