Smoktech TFV18 Mini Meshed Replacement Coil 3 Pack
Regular price:
product unavailable
Description
Technical Overview – TFV18 Mini Coil Platform
This product contains 3 genuine Smoktech TFV18 Mini replacement coil heads. Available resistance options: 0.15Ω Dual Meshed, 0.2Ω Meshed and 0.33Ω Meshed.
All variants are engineered exclusively for the TFV18 Mini tank platform and are designed for high-wattage direct-lung (DL) vaping using high-VG e-liquids.
Resistance & Performance Matrix
| Resistance | Structure | Recommended Wattage | Vapour Output | Best Liquid Type |
|---|---|---|---|---|
| 0.15Ω | Dual Mesh | 80–110W (Best: 90W) | Very High | 70VG+ |
| 0.2Ω | Single Mesh | 40–80W (Best: 60W) | High | 70VG+ |
| 0.33Ω | Single Mesh | 80–140W (Best: 100–110W) | High & Stable | 70VG+ |
Design & Engineering Characteristics
- Large surface mesh heating element for even heat distribution
- Expanded cotton wicking ports engineered for high VG liquids
- Threaded screw-in coil head format
- Built for high airflow sub-ohm tank use
Because these coils run at higher wattage, correct priming and adequate airflow are essential. Starting too high can shorten coil lifespan or cause harsh flavour on first use.
Compatibility
- Compatible with: Smoktech TFV18 Mini Tank
- Often supplied with TFV18 Mini kit configurations (e.g., Arcfox / Morph 2 variants that ship with TFV18 Mini)
Not Compatible
- Not compatible with standard/full-size TFV18 coils
- Not compatible with TFV16 coil platforms
- Not compatible with TFV8 Baby / Big Baby series
- Not compatible with Nord, RPM or pod systems
TFV18 Mini coils use a distinct size and threading compared to other SMOK coil families. Always confirm your tank is the TFV18 Mini before purchase.
Priming & First Use Protocol
- Apply e-liquid to all visible cotton ports.
- Install the coil securely into the tank base.
- Fill the tank and allow saturation for at least 10 minutes.
- Start below the “Best” wattage point and increase gradually.
FAQ
This product contains 3 coil heads per box (3 pack). 0.15Ω Dual Meshed is the most aggressive (Best: 90W). 0.2Ω is the most flexible and starts lower (40–80W, Best: 60W). 0.33Ω is stable at higher power with a wider range (80–140W, Best: 100–110W). These coils are designed for high VG liquids (typically 70VG+). Thinner liquids may flood under higher wattage and airflow conditions.How many coils are in the pack?
Which resistance should I choose?
Can I use 50/50 e-liquid?
Pack contains 3 coil heads. Hardware component only. No nicotine included. 18+ only.
