NEAFS TEO-X Heating Device – Heat-Not-Burn System
Regular price:
product unavailable
Description
NEAFS TEO-X – Advanced Heat-Not-Burn Device Overview
NEAFS TEO-X is a next-generation heat-not-burn (HNB) system designed for controlled thermal activation of stick-based materials without combustion. The device operates within a regulated temperature range (~350°C), producing aerosol rather than smoke.
Compared to earlier HNB platforms, the TEO-X introduces a faster activation phase, reinforced internal heating structure and a more compact body format. This type of system is increasingly adopted across Ireland, including Limerick, as users explore structured alternatives to continuous-use vaping devices.
System Characteristics
- Combustion-free operation – controlled heating only
- Reinforced heating pin – improved durability vs blade systems
- Fast activation cycle – approx. 15–20 seconds
- Session-based usage – fixed duration and puff structure
- Compact alloy body – lightweight and portable
Performance Matrix
| Parameter | Value | Practical Impact | Notes |
|---|---|---|---|
| Heating System | Internal Heating Pin | Stable thermal delivery | More resistant than blade systems |
| Heat-Up Time | ~15–20 seconds | Reduced waiting time | LED feedback confirms readiness |
| Temperature Range | ~350°C | Aerosol production | Below combustion threshold |
| Session Output | ~5–6 minutes / 14–16 puffs | Predictable use cycle | Chipset controlled |
| Battery Performance | 20–25 sessions | Full-day usage potential | Optimised efficiency |
| Charging | USB-C (Fast Charge) | Quick recharge | ~60–90 min full cycle |
| Stick Compatibility | 7.2–7.5mm | Standard HNB size | Designed for NEAFS sticks |
Heating System Design
The internal heating structure uses a reinforced pin architecture which improves mechanical durability and maintains consistent heat transfer across repeated sessions. This design reduces the risk of structural damage compared to earlier blade-based systems.
Usage Protocol
- Insert compatible stick into chamber
- Activate device using button
- Wait ~15–20 seconds for heating phase
- Use within session duration
- Remove used stick after completion
Maintenance Guidelines
- Clean chamber every ~20 uses
- Use soft cleaning tool only
- Avoid pressure on heating pin
- Ensure device is cooled before cleaning
Battery Behaviour in Irish Climate
In lower temperatures (below 10°C), battery efficiency may decrease. This is relevant in Ireland during colder periods. For optimal performance, allow the device to reach room temperature before use.
Safety Systems
- Temperature regulation
- Session limiter
- Battery protection circuit
- Short-circuit protection
- Automatic shutdown after session
FAQ – NEAFS TEO-X Device
The device reaches operating temperature in approximately 15–20 seconds.
Up to around 20–25 sessions depending on usage conditions.
The device supports 7.2–7.5mm sticks, primarily designed for NEAFS formats.
No. The system operates below combustion temperature.
Included in the Kit
- NEAFS TEO-X Device
- USB-C Charging Cable
- User Manual
Regulatory Information – Ireland
This product is intended for adult users (18+). Heated tobacco devices are regulated under Irish law. Dispose of electronic waste via authorised WEEE recycling systems.
Intent Disclosure
This content is provided for informational and technical reference purposes only.
Last Updated: March 2026