Aspire Nautilus BVC Coil Heads x 5

5 x Aspire Nautilus BVC Coil Heads

BVC stands for "bottom vertical coil". The coil head therefore has a vertical winding. This ensures better taste and vaporization effect, and according to the manufacturer, the heads should have a much longer lifespan. Cotton wool was used as the supporting material for the rolls, which ensures very good flavor development.

The Nautilus BVC Coil heads are suitable for:

• Aspire Nautilus vaporizer
• Aspire Nautilus GT atomizer and Nautilus GT kit
• Aspire Nautilus GT Mini atomizer
• Nautilus XS, Nautilus 2 and Nautilus 2S vaporizers
• Aspire Nauitlus Prime Kit
• Nautilus Mini
• Nautilus AIO Kit (Only the coils with a resistance of 1.8 Ohm and 1.6 Ohm are suitable for this kit.)
• Lynden Play Kit
• Vaptio Cosmo Kit

Tip: The coils manufactured by Vaptio / Lynden are identical to the versions from Aspire

• For beginners we recommend the atomizer heads with 1.6 or 1.8 ohms.
• The Nautilus coils are available in different versions:
• The Nautilus atomizer heads do not fit into the Aspire Spryte AIO Kit, Aspire ET-S BDC, Triton, Atlantis or Nautilus X.
• The variant with a resistance of 0.4 ohms and 0.7 ohms fit into the K3 evaporator, but they are no recognized by the K3 battery.
• ONLY coils with a resistance of 1.6 ohms and 1.8 ohms are suitable for the Nautilus AIO kit.

New coils from Aspire. Lower vertical coil. More flavor, more steam production and long-lasting, reliable operation.

• 0.3Ω (23-28W) Nautilus Mesh Coil. Compatible Products: Zelos 3, Zelos 50W 2.0, Zelos X, Nautilus Prime X, Nautilus Prime, Nautilus GT, BOXX Compatible Tanks: Nautilus 3S, Nautilus 3²², Nautilus 3, Nautilus Nano, Nautilus GT, Nautilus GT mini, Nautilus 2S
• 0.4 ohms:The coils are designed for a power range of 23-28W and are suitable for direct pulmonary pulls (DL). They were developed for the Nautilus 2S and the Nautilus GT, but are compatible with the mentioned atomizers.
• 0.7 ohm M: Mesh coil / sieve coil - one winding. A winding is built into these coils and a bent and perforated wire mesh is used for the winding.The atomizer heads are designed for a power range of 20-25W and are suitable for direct pulmonary draws (DL). They were developed for the Nautilus 2S and the Nautilus GT, but are compatible with the mentioned atomizers. The variant with the addition Lynden or Vaptio is labeled under the brand names Lynden or Vaptio.
• 0.7 ohms:The coils are designed for a power range of 18-23W and are suitable for direct pulmonary pulls (DL). The variant with the addition Lynden or Vaptio is labeled under the brand names Lynden or Vaptio.
• 1.6 ohms:The coils are designed for a power range of 7-12W and are suitable for mouth to lung (MTL) vaping. The variant with the addition Lynden or Vaptio is labeled under the brand names Lynden or Vaptio.
• 1.8 ohms:The coils are designed for a power range of 10-14W and are suitable for mouth to lung (MTL) vaping.
• 1.8 ohms NS:The coils are designed for a power range of 10-12W and are suitable for mouth to lung (MTL) vaping.The NS coils were specially developed for vaping Nicotine Salt Liquids and are therefore ideal for those who want to change.

Important: When using a new atomizer head, please wait 5 minutes before using it for the first time so that the cotton can soak up the liquid.

Changing the coil head:

Unscrew the base with the coil head from the tank housing and remove the coil head by unscrewing it from the base. Now take a new atomizer head and screw it into the base, then screw it back into the tank housing. When using atomizer heads with less than 1.0 ohm resistance, only batteries that can deliver a high continuous load (> 20 A) or are marked as sub-ohm-compatible may be used.

Scope of delivery :

5 Aspire Nautilus BVC coils 5 x BVC coil heads