Ursa Nano 2 Pod Kit
Regular price:
product unavailable
Description
Lost Vape Ursa Nano 2 Pod Kit – 900mAh / 9W–22W Auto-Draw System (Ireland)
The Lost Vape Ursa Nano 2 is a compact refillable pod kit built around auto-draw activation and smart pod detection. It uses a regulated Quest chipset architecture with a defined 9W–22W output range and a dynamic backlit side panel that illuminates during use.
Ursa Nano 2 – Technical Quick Summary
- Activation: Auto-draw (no fire button)
- Battery: 900mAh (built-in)
- Power Range: 9W–22W (regulated)
- Charging: USB-C (5V/1A)
- Pod Capacity: 2ml (TPD format)
- Included Cartridges: 0.6Ω & 0.8Ω URSA cartridges
- Signature Hardware: Dynamic backlit panel + side airflow slider
- Static Wick Saturation Time: 5 minutes
What’s in the Box
- 1 × Lost Vape Ursa Nano 2 Device (900mAh)
- 1 × URSA Cartridge 0.6Ω
- 1 × URSA Cartridge 0.8Ω
- 1 × USB-C Charging Cable
- 1 × Lanyard
- 1 × User Manual
Batch-Specific Variance Clause: Box contents may vary by batch; verify items and specifications printed on the physical packaging before first use.
Activation & Airflow Control
- Auto-draw activation: inhale to activate (no fire button)
- Airflow: side slider for draw restriction adjustment
- Smart pod detection: chipset adapts output behaviour to the inserted cartridge
Dynamic Backlit Panel
The Ursa Nano 2 integrates a dynamic backlit panel designed to illuminate during use, providing a clear visual status effect without adding a screen interface.
Heating Element Status
Heating Element: Integrated (non-replaceable, built into the cartridge)
Static Wick Saturation Time
Static Wick Saturation Time: 5 minutes after refilling a cartridge before first activation.
Hardware Specification Matrix
| Component | Technical Specification | Operational Impact | Compliance Notes |
|---|---|---|---|
| Battery | 900mAh (built-in) | Rechargeable power supply for regulated output | WEEE disposal required |
| Power Output | 9W–22W (regulated) | Chipset-controlled output envelope | Verify printed batch parameters |
| Cartridges (Included) | URSA 0.6Ω & 0.8Ω | Supports MTL to restricted RDL depending on airflow and liquid viscosity | 2ml TPD cartridge format |
| Charging | USB-C, 5V/1A | Stable charging profile for integrated Li-Ion | Use regulated 5V source |
| Safety Features | Short-circuit protection, weak battery protection, over-heat protection | Chipset safety suite for controlled operation | Device-level protections |
Charging Guidance
- Use a regulated 5V USB power source.
- Charging specification: 5V/1A.
- Avoid unregulated/unknown adapters and damaged cables.
Cold Climate Guidance (Ireland)
- Below 10°C, e-liquid viscosity increases and wicking may slow down.
- Add +2 minutes to saturation time in cold conditions.
- If the device has been stored cold, allow it to stabilise to room temperature before use.
Regulatory Stability – Ireland (2026)
This product is supplied for adult users (18+) in Ireland. EU TPD cartridge capacity limits apply in the TPD format (2ml). Irish excise duty (EPT €0.50/ml) applies to nicotine-containing e-liquids where applicable. Dispose of the device and battery via authorised WEEE Ireland recycling channels.
Batch-Specific Variance Clause: Batch-specific variance may apply; verify parameters printed on physical packaging before activation and use.
Frequently Asked Questions
No. The Ursa Nano 2 is auto-draw activated (inhale to activate). Airflow is adjusted via the side slider. Static Wick Saturation Time: 5 minutes before first activation after refill. The kit is bundled with URSA 0.6Ω and 0.8Ω cartridges. Verify printed resistance and batch markings on the packaging.Does the Ursa Nano 2 have a fire button?
How long should I wait after refilling?
Which cartridges are included in the box?
Compatibility Last Verified
Compatibility verified against Lost Vape Ursa Nano 2 official specification set and EU/TPD format references. Packaging specifications remain authoritative.
Technical Synergy
The regulated 9W–22W output envelope, smart pod detection and included 0.6Ω/0.8Ω cartridges provide a controlled operating range across different e-liquid viscosities. Auto-draw activation and the side airflow slider allow mechanical draw tuning without introducing a fire-button interface, while the dynamic backlit panel provides a distinct hardware status effect during use.
Document Update Notice: This product description was last reviewed and updated on 16 February 2026.