innokin Kroma Z Pod Kit

Description

Technical Overview & EU 2ml Pod Compatibility

The Innokin Kroma-Z Pod Kit is a regulated pod system designed for Mouth-to-Lung (MTL) and Restricted Direct Lung (RDL) vaping. It uses EU-compliant 2.0 ml refillable Zenith compatible pods and provides variable output control through an integrated adjustment ring and an intuitive single-button interface. The device supports a range of Zenith coil resistances and includes built-in protections such as short-circuit protection, over-time cut-off, and low-voltage shutdown for stable daily use.

Visual Compatibility Badge

EU TPD 2.0 ml Pod System | Adjustable Output | Zenith Pod Platform | USB-C Charging

Physical Fit & TPD Version Check

The Kroma-Z Pod Kit supports Innokin Zenith 2.0 ml pods and coils. Only Zenith pods and Zenith coil heads are physically compatible with the device. This product is compatible with EU TPD-compliant 2.0 ml pods. Pods or tanks outside the Zenith series (e.g., non-Zenith pods, larger capacity tanks) are not compatible and will not function correctly.

Spec Icon Block

Battery

1500 mAh (integrated)

Pod Capacity

2.0 ml (EU TPD)

Output Control

Adjustable (button + ring)

Charging

USB-C

What’s in the Box

1 × Innokin Kroma-Z Device
1 × Zenith Pod (refillable, 2.0 ml)
1 × Zenith Coil (installed)
1 × USB-C Charging Cable
1 × User Manual

Resistance Overview (Zenith Coils)

The Kroma-Z uses Zenith coils available in multiple resistances suitable for both tighter MTL and lighter RDL draws. Replace the coil head when flavour degrades or wicking becomes inconsistent.

1.2 Ω – Tight MTL
1.6 Ω – MTL
0.8 Ω – RDL (looser draw)

Pod Performance Reference (Scroll Matrix)

Resistance	Inhale Style	Typical Output Recommendation	Recommended VG/PG	Nicotine Guidance
0.8 Ω	RDL	~15–18 W (adjustable)	50/50–60/40	3–6 mg freebase or 6–12 mg salts
1.2 Ω	Tight MTL	~9–12 W (adjustable)	50/50	10–20 mg salts
1.6 Ω	MTL	~9–11 W (adjustable)	50/50	10–20 mg salts

Material Transparency

Refillable Zenith pods with built-in coil heads for replace-as-needed maintenance.
Side fill port with silicone stopper.
Airflow and power adjustment works together with pod coil resistance for stable performance.

Liquid Compatibility & Lifespan Notes

Baseline recommendation: 50/50 VG/PG for stable feed across resistances.
Higher VG increases viscosity, slowing capillary feed and shortening coil life in cooler climates.
Sweeter/darker liquids often reduce coil lifespan relative to cleaner flavour profiles.

Priming Protocol

Fill the Zenith pod via the side fill port below the max line.
Ensure liquid fully wets wicking material before first use.
Allow 8–10 minutes post-fill for wicking saturation before activation.

Cold Activation Guidance

Warm the pod and device after cold exposure before first draw.
Take 1–2 gentle draws to establish feed after refill or cold storage.

Ireland Climate & Disposal

At lower temperatures, VG thickens — allow extra time for saturation.
Dispose of used pods and device components in accordance with local WEEE/electronics recycling guidelines.
Intended for adult users (18+) in Ireland.

This product contains nicotine which is a highly addictive substance.

Technical FAQ (Expandable)

Which pods fit the Kroma-Z Pod Kit?

The device supports Innokin Zenith 2.0 ml pods only. Other pod types or larger tanks are physically incompatible.

What VG/PG ratio should I use?

Use 50/50 VG/PG liquids for stable wicking. Higher VG may slow feed and increase dry-hit risk.

Does output adjustment affect coil life?

Higher output settings can increase coil wear and reduce lifespan relative to lower settings, combined with liquid composition and usage patterns.

Technical Liquid Synergy

0.8 Ω (RDL): 50/50–60/40 liquids balance feed with higher output.
1.2 Ω & 1.6 Ω (MTL): 50/50 liquids ensure predictable wicking at lower power.

Compatibility last verified: 15 February 2026

Safety

Innokin Kroma Z Replacement Pod

Price: €8.99

Innokin Zenith Coils – 5-Pack

Price: €11.99