Innokin Endura T22 Pro Kit + 10 ElfLiq E Liquds
Regular price:
product unavailable
Description
Technical Overview & EU 2ml Tank Compatibility
The Innokin Endura T22 Pro is a regulated Mouth-to-Lung (MTL) device supplied with the Prism T18E Pro tank in the EU 2.0ml TPD configuration. This system is engineered exclusively for the Prism T18E and Prism M18 coil platform used in 2.0ml EU tanks.
This bundle includes 10× ElfLiq 10ml nicotine salt e-liquids, typically formulated in a 50/50 VG/PG ratio for low-power MTL operation.
Physical Fit & TPD Version Check (Critical)
- Tank supplied: Prism T18E Pro – 2.0ml EU TPD version.
- Compatible coils ONLY: Prism T18E and Prism M18.
- Not compatible: Standard Prism T18 coils (2.5ml version).
- Important: Standard T18 coils are longer and will not seal correctly in EU 2.0ml T18E tanks.
Always ensure replacement coils are labelled T18E or M18 when purchasing for EU tanks.
What’s Included in the Bundle
- 1 × Innokin Endura T22 Pro Device
- 1 × Prism T18E Pro Tank (EU 2.0ml)
- 2 × Prism T18E Coils (included resistances may vary by batch)
- 1 × USB-C Cable
- 1 × User Manual
- 10 × ElfLiq Nicotine Salt E-Liquid 10ml (variant dependent)
Top Fill Mechanism (Correct Procedure)
- Locate the arrow indicator on the top cap.
- Push the top cap firmly in the direction of the arrow.
- The cap will slide open to reveal the fill port.
- Do not fill through the central chimney.
- Close securely before use.
Coil Platform Overview (EU Version)
- Prism T18E 1.5Ω – MTL operation
- Prism T18E 1.7Ω – MTL (11.5W–13.5W typical range)
- Prism M18 1.6Ω – Lower wattage MTL
Power & Coil Behaviour Matrix
| Coil Type | Resistance | Recommended Mode | VG/PG | Technical Notes |
|---|---|---|---|---|
| T18E | 1.5Ω | Mode 2–4 (11–13.5W) | 50/50 | Stable MTL coil for regulated output range. |
| T18E | 1.7Ω | Mode 3–4 (12.5–13.5W) | 50/50 | Designed for slightly warmer MTL output. |
| M18 | 1.6Ω | Mode 1 (9.5W recommended) | 50/50 | Using Mode 4 (13.5W) significantly reduces lifespan. |
Liquid Compatibility & ElfLiq Advisory
- ElfLiq salts are typically 50/50 VG/PG.
- T18E coils use small wicking ports.
- Pro-Tip: Due to higher sweetener levels in ElfLiq, avoid chain vaping. Allow time between puffs for full re-saturation.
Priming Protocol
- Install coil securely.
- Fill tank and wait 8–10 minutes before first activation.
- Start on Mode 1 or Mode 2 for initial break-in.
Ireland Climate Note
- Below 10°C, VG thickens and wicking slows.
- Warm tank in hand before first use in cold conditions.
This product contains nicotine which is a highly addictive substance.
Technical FAQ
No. Only T18E or M18 coils fit EU 2.0ml tanks. Standard T18 coils are longer and incompatible. Mode 1 (9.5W) is recommended. Higher modes significantly shorten lifespan. 50/50 VG/PG liquids are recommended for stable capillary feed.Can I use standard T18 coils?
Which power mode is safest for M18?
What liquid ratio should I use?
Compatibility last verified: 16 February 2026