Elf Bar ELFX Pro Pod Kit
Regular price:
product unavailable
Description
Elf Bar ELFX Pro Kit – Technical Overview & Full Usage Guide
Elf Bar ELFX Pro Kit is a refillable pod vape system designed for adjustable mouth-to-lung (MTL) to restricted direct-to-lung (RDTL) use in a compact 2ml TPD-format cartridge platform. It combines a 1200mAh internal battery, variable output commonly listed up to 45W (maximum output depends on installed pod resistance), a 0.96" colour touchscreen for direct control, and Smart Mode logic that recognises pod resistance to guide output selection.
The ELFX Pro uses refillable pods with integrated QUAQ Dual Mesh coil architecture. This coil structure is designed to deliver stable heating behaviour and consistent flavour across steady draw cycles, with near-instant activation specified at 0.1 seconds. Operation is draw-activated to keep the experience simple while still allowing detailed tuning for users who prefer precise control.
This device is intended for adults only (18+). In Ireland, age verification applies at point of sale, and nicotine-containing e-liquids used with this device are regulated under EU TPD rules. Store the device and any e-liquids out of reach of children and use responsibly.
Pro vs Standard (Technical Delta)
What the Pro version changes in daily use
Compared to the standard ELFX model (commonly listed with a 1000mAh battery and 5V/1A charging), ELFX Pro increases battery capacity to 1200mAh, supports faster USB-C charging input at 5V/2A, and adds a 0.96" colour touchscreen interface for interactive control of wattage and operating modes. Smart Mode provides guidance based on pod resistance, reducing the chance of running a pod outside its intended power window and helping new users keep performance stable.
Hardware & Power Platform (Matrix 1/2)
Battery, output, charging, interface, modes
| Component | Specification | Technical Impact |
|---|---|---|
| Device type | Refillable pod vape system | Reusable device with replaceable refillable pods (not disposable) |
| Battery | 1200mAh internal | Runtime varies with wattage, airflow, liquid viscosity, and puff frequency |
| Output range | 5–45W (pod dependent) | Maximum output is typically achievable only with lower-resistance pods |
| Charging input | USB-C 5V / 2A | Faster recharge cycles than 1A systems when using a stable 5V USB source |
| User interface | 0.96" colour touchscreen | Interactive control of wattage and mode selection |
| Smart Mode | Automatic pod recognition | Guides output selection to reduce mis-setting risk and coil stress |
| Power profiles | Eco / Turbo | Eco prioritises efficiency; Turbo increases warmth and intensity when suitable |
| Activation | Auto-draw | Draw activation supports simple operation without a fire button |
| Construction | Aluminium alloy frame | Lightweight structure intended for daily carry durability |
Pod System, QUAQ Dual Mesh & Liquid Matching (Matrix 2/2)
2ml pods, resistances, airflow, VG/PG behaviour
| Pod / Coil Feature | Specification | Usage Context |
|---|---|---|
| Pod capacity | 2.0ml (TPD format) | Refillable cartridge; close the seal fully to reduce leakage risk |
| Coil technology | QUAQ Dual Mesh | Dual mesh coil structure designed for uniform heating behaviour |
| Activation behaviour | 0.1s instant activation | Near-instant ramp-up aims to reduce delay and stabilise vapour delivery |
| Included pods | 0.6Ω + 0.8Ω | 0.8Ω typically favours tighter MTL; 0.6Ω supports looser RDTL |
| Compatible range (availability varies) | 0.4Ω – 1.0Ω | Lower resistance increases warmth/output; higher resistance supports cooler, tighter draw |
| Airflow system | Side adjustable slider | Fine draw restriction control from tighter MTL to looser restricted inhale |
| Liquid viscosity (practical) | Typically 50/50 or 60/40 VG/PG | Balanced viscosity supports stable wicking; thicker blends may wick slower at higher wattage |
In colder months in Dublin, allow extra time after filling before the first draw to support full wick saturation, especially on a new pod or when using higher VG blends.
How to Use ELFX Pro (Step-by-Step)
Setup, filling, touchscreen control, airflow tuning
- Charge the device via USB-C using a stable 5V USB power source that can support 2A input.
- Remove the pod, open the fill port, and refill up to the 2ml limit; close the seal fully.
- Insert the pod firmly and allow several minutes for saturation after the first fill.
- Use the touchscreen to confirm mode selection (Eco/Turbo) and wattage settings if required.
- Adjust airflow with the side slider to match your preferred draw style.
- Inhale gently through the mouthpiece to activate the device (auto-draw).
Maintenance & Troubleshooting
Pod lifespan, condensation, contacts, taste changes
- Use Smart Mode as baseline: it reduces coil stress caused by accidental over-powering.
- After refilling: start with shorter gentle puffs to confirm stable wicking before longer draws.
- Condensation management: keep the device upright, avoid overfilling, and ensure the fill seal is closed fully.
- Contact hygiene: wipe pod/device contacts (dry cloth) to maintain stable resistance detection and reduce intermittent connection behaviour.
- When to replace a pod: replace when flavour drops, draw becomes harsh, or persistent gurgling continues after refilling and airflow checks.
What’s in the Box
Included kit contents
- 1 × Elf Bar ELFX Pro Device
- 1 × 0.6Ω QUAQ Pod (2ml)
- 1 × 0.8Ω QUAQ Pod (2ml)
- USB-C Charging Cable
- User Manual
