Aspire PockeX Pocket AIO Starter Kit
Why Choose Pockex Aio Aspire Kit?
A compact and powerful battery:
The built-in 1500 mAh battery of your Pockex Pocket Aio is like the image of the kit, a simple and efficient battery, it will be recharged using the USB cable provided in the kit. When your battery begins to lose autonomy, your fire button will light up in a pinkish color to indicate that you have 30% battery left. You will therefore have to connect your battery, the red light point will appear under the USB port of your electronic cigarette to indicate its charge. To optimize charging, use a wall charger.
A simple clearomiser signed Nautilus X:
The filling of the tank is similar to the Nautilus X clearomiser, it will not be done at the top by unscrewing the top-cover. Its capacity is 2ml. Unscrew the top-cap, and proceed to the filling up to the maximum level delimited by a witness line. Your resistance being fixed to your top-cover it will be removed automatically during the filling which will make it easier. Remember to soak your resistance before any use and start by pulling lightly on it.
Efficient and economical resistors:
The new U-Tech vertical dual coils system is relatively ingenious because it allows the air to pass through the 2 coils separately to create a better rendering of flavors and a pleasant vape. In addition, the organic cotton present in your resistances will promote the restitution of tastes. In your kit you will find two different resistors.
- 0.6ohm which will be used to make vapor, for an almost direct inhalation with a rather soft hit. Operating range from 18 to 23 watts.
- 1.2ohm less vapor when drawing, indirect inhaling with a more strongly felt hit. Operating range of 10 to 15 watts.
Tips: we advise you to use e-liquids low in vegetable glycerin (- 50%) for optimal use.
Replacing the resistor:
Unscrew the top-cover of your pyrex. Unscrew the old resistor from your top-cover, then screw on a new resistor. Always soak its resistance well before the first use, take the opportunity to fill your pyrex with e-liquid if you need it now. Once your new resistance is fixed to your top-cover, screw the top-cover back to your pyrex. Start with light shots so as not to burn out your resistance.
- - leak-proof
- - easy to fill from above (Topfill)
- - U-Tech Coil for premium taste
- - extremely compact design
- - Topairflow
- Battery: 1500mA (integrated)
- Dimensions: 19.7 x 117.7 mm (including DripTip)
- Tank volume: 2.0 ml
- PockeX SS316 Coil 0.6 Ohm (18-23 W)
- Micro USB to charge the device
- Passthrough function (steaming possible during charging)
1 x Aspire PockeX - Pocket AIO Starter Kit
1 x Aspire PockeX SS316 Coil 0.6 Ohm (preinstalled)
1 x Aspire PockeX SS316 Coil 0.6 Ohm
1 x Micro-USB charging cable
1 x instruction manual
Please read our instructions for the Sub Ohm steam thoroughly beforehand. Since this product is a hygiene article, you can not revoke the purchase after opening the seal. Please note the information on the right of revocation.