Aspire BP80 Kit

Aspire BP80 e-cigarette set

The e-cigarette set called BP80 from the manufacturer Aspire consists of a battery with a capacity of 2500 mAh and a pod system. The battery was permanently installed in the e-cigarette set. Up to 4.6 ml of fresh liquid fit into the BP80 Pod. The appropriate heads are already included in the scope of delivery.

BP80 e-cigarette set

• Battery capacity: 2500 mAh
• Output power: 1-80 watts
• DL possible
• Adjustable airflow control
• Bottom filling
• Tank volume: 4.6 m
• l0.96 "color display
• Dimensions: 118 x 33 x 26 mm

Scope of delivery

• 1x BP80 battery
• 1x BP80 Pod (2 ml)
• 2x BP 0.6 ohm head
• 1x USB-C charging cable
• 1x instruction manual

Vaping with up to 80 watts - BP80 e-cigarette set

You receive the Aspire BP80 e-cigarette set with a built-in battery and a battery capacity of 2500 mAh. There is a 0.96 ”color display on the outside of the battery, which enables you to read various parameters. You can also use the BP80 battery with an output power of 1 to 80 watts. An Aspire ASP chip was built into the set. With the chip, the e-cigarette is equipped with various protective mechanisms such as short-circuit protection and protection against overheating.

BP Heads - Vaping in the sub-ohm range

Two matching BP heads are included in the scope of delivery for vaporizing the liquid in the pod. Both 0.6 ohm heads are designed for vaping with direct lung inhalation in the sub-ohm range. The Aspire BP60 RBA Head can also be used. This means that you can also steam with your self-made windings. Please order this head separately. Heads are one of the wearing parts of an e-cigarette. Please change the accessories regularly to counteract negative vapor or taste development.