Aspire BP Replacement Coils – 5-Pack
Regular price:
product unavailable
Description
Aspire BP Replacement Coils – 5 Pack
Aspire BP replacement coils are designed for Aspire BP platform devices including pod-mod and AIO systems. All variants use mesh heating structure and are intended for regulated wattage operation.
Platform Compatibility
- VooPoo × Aspire BP80
- Aspire BP60
- Aspire Rhea X (BP Pod)
- Aspire Huracan LX (BP Pod Platform)
- Other Aspire BP-compatible pod systems
BP coils are not compatible with Nautilus, PockeX or AVP platforms.
Physical Fit & TPD Version Check (EU / Ireland)
BP coils share standardised housing dimensions within the BP platform. They are compatible with EU 2ml TPD pod configurations and extended-capacity global pods where applicable.
No chimney conflict exists between EU 2ml and global pod versions within the BP system.
0.15Ω – 1.0Ω
DL / RDL / MTL
50/50 – 70/30
Wattage
What’s in the Box
- 5 × Aspire BP mesh coil heads (selected resistance)
- Original Aspire retail packaging
- Pod/device not included
Available Resistances
- 0.15Ω Mesh – Direct Lung
- 0.17Ω Mesh – Direct Lung
- 0.3Ω Mesh – Restricted DL
- 0.4Ω Mesh – Restricted DL
- 0.6Ω Mesh – Restricted DL
- 1.0Ω Mesh – MTL
Resistance & Performance Matrix
| Resistance | Inhale Style | Recommended VG/PG | Verified Wattage | Nicotine Guidance |
|---|---|---|---|---|
| 0.15Ω | DL | 70/30 preferred | 60–80W | 3mg freebase |
| 0.17Ω | DL | 70/30 preferred | 45–55W | 3mg freebase |
| 0.3Ω | RDL | 60/40–70/30 | 30–40W | 3mg–6mg freebase |
| 0.4Ω | RDL | 60/40 | 25–35W | 6mg freebase |
| 0.6Ω | RDL | 50/50–60/40 | 15–25W | 6mg–12mg freebase |
| 1.0Ω | MTL | 50/50 | 10–16W | 10mg–20mg salts |
Material Transparency & Architecture
All Aspire BP coils use mesh heating structure designed for efficient surface heating and consistent airflow interaction. Intended for wattage mode only.
Liquid Compatibility & Longevity
Average lifespan under moderate use: approx. 15–25ml of e-liquid. Lifespan varies depending on sweetener concentration, airflow, power setting and frequency of use.
Priming Protocol
- Apply several drops of e-liquid directly to visible cotton ports.
- Install coil into pod.
- Fill pod and wait 5–10 minutes.
- Take 2–3 gentle draws without activating device.
- Start below recommended wattage and increase gradually.
⚠ Avoid prolonged dry firing.
Authenticity Verification
Each pack includes a unique scratch authenticity code for verification via Aspire’s official authentication system.
Ireland Climate & Disposal
Used coils should be disposed of according to WEEE and local recycling regulations. Products intended for adult users (18+) in Ireland.
Compatibility last verified: 15 February 2026