Innokin iClear 16 Dual Coils – 5 Pack Archive
Regular price:
product unavailable
Description
Archive Entry – Legacy Clearomizer Coil System
This entry documents Innokin iClear 16 Dual Coils – 5 Pack, a replacement coil system used in the early Innokin iClear 16 clearomizer platform. The product is no longer part of the active catalogue and is preserved here as part of the Electronic-Cigarette.ie hardware archive.
The Innokin iClear 16 was one of the early clearomizer systems widely used in the first generation of refillable e-cigarette devices. It featured a dual-coil top-wick design that produced warmer vapour compared to later bottom-coil tanks.
Replacement atomizer heads were sold in packs and designed specifically for the iClear 16 clearomizer platform. These coils used silica wicks and kanthal wire to deliver a tight mouth-to-lung draw typical of early vaping hardware. :contentReference[oaicite:0]{index=0}
Because of their higher resistance and top-coil construction, these heads worked best with lower-power devices and higher-PG or balanced 50/50 e-liquids.
Looking for currently available coil heads?
Browse Current Coil HeadsTechnical Specification Matrix
Swipe horizontally on iPhone or Safari mobile view to see all columns.
| Parameter | Specification | Usage Context | Technical Notes |
|---|---|---|---|
| Product name | Innokin iClear 16 Dual Coil Heads | Replacement coil system | Designed for iClear 16 clearomizer |
| Pack size | 5 coils | Maintenance component | Replace worn atomizer heads |
| Coil type | Dual coil | Top-coil clearomizer design | Produces warmer vapour |
| Resistance options | 1.5Ω / 1.8Ω / 2.1Ω | Low-power devices | Typical early MTL resistance range |
| Wicking material | Silica wick | Top-wick configuration | Multiple wick strands for liquid absorption |
| Compatible device | Innokin iClear 16 clearomizer | Early clearomizer platform | Not compatible with modern sub-ohm tanks |
| Market status | Archived / discontinued | Legacy hardware | Preserved for compatibility reference |
Market & Historical Context – Ireland
The iClear 16 system appeared during the early expansion of refillable e-cigarette hardware before the introduction of modern sub-ohm tanks and mesh coil platforms. Devices from this period focused on simple clearomizer designs and relatively high-resistance coils intended for mouth-to-lung vaping.
Many Irish vape shops sold iClear clearomizers and replacement coils during the early growth of the vaping market. Over time, these systems were replaced by newer bottom-coil and mesh-coil technologies offering improved wicking efficiency and flavour delivery.
Today, products such as the iClear 16 coils remain primarily part of the historical hardware archive documenting the evolution of refillable vape systems.
18+ only. Vaping products are intended for adult users.
Innokin iClear 16 Coil Archive FAQ
What devices used the iClear 16 coils?
These coils were designed for the Innokin iClear 16 clearomizer used on early e-cigarette starter kits.
What resistance options were available?
Typical resistance options included 1.5Ω, 1.8Ω and 2.1Ω depending on the preferred draw and power level. :contentReference[oaicite:1]{index=1}
Are iClear 16 coils still widely used?
No. Most modern vape devices now use bottom-coil or mesh-coil systems that provide improved flavour and vapour performance compared with early clearomizer designs.
Last Updated: March 2026