Categories
Vendor
Coil Heads from Innokin
Here you will find various heads, including coil heads, that come from Innokin and can be used in a variety of ways.
Innokin
Vaping in the moderate range
If you prefer vaping in the moderate range, this is back vaping and heads are required that have at least a value higher than 0.6 ohms. With baking steam, the resulting steam is first collected in the mouth and then inhaled into the lungs. The Innokin Prism T20 Heads with 1.5 ohms are perfect for this, for example. The Innokin e-cigarette called Endura T20 with 1000mAh or the version with 1500mAh support the Prism T20 heads with 1.5 ohms.
Subohm vaping
If you prefer to inhale the vapor directly into your lungs when vaping on an e-cigarette, then heads, also called coil heads, which have a lower resistance value, are suitable for this. The Innokin iSub Plex 3D Heads with 0.35 ohms are suitable for sub-ohm vaping, for example. These can be operated between 30 watts and 55 watts and have a Kanthal winding. The Innokin iSub B Clearomizer with 3ml tank volume is a suitable vaporizer for the heads. It doesn't matter whether you use the heads in the moderate or subohm range. It is very important to replace them regularly as they are consumable parts of an e-cigarette. As soon as you perceive a negative taste development of your liquid and / or notice a decreasing development of vapor, you should replace the head with a new one.
